Sunday, 3 July 2011

A series of photos showing the various stages of assembly.

Here we have a section of linked tracks which have
been pinned with 3mm aluminium rod and the end caps
glued over the ends.
Two links showing the drilled out fulcrum points and
a piece of aluminium rod used as the hinge pin.
Many tedious hours of casting is seen in this
The first coat of paint has been sprayed on, here you
can see the inner side of the track which doesn't have the
grease nipples.
A nice close up of the finished track with some weathering added. 

No comments:

Post a Comment