Thursday, 7 July 2011

Deflector rail.

The distinctive deflector rail was made from 3mm thick welding rod, it was all pinned together just to hold everything in place for brazing.

Here you can see the roughly finished strengthening ribs, this gets finished off once the brazing is complete.

Another angle of the rail.

This is how it all looks after the brazing, the excess brazing will be ground away and sandblasted. 

The completed rail.

Checking the fit.

The much neater finish after sandblasting.

A closeup of the finish.

Undercoated in red primer and oversprayed in automotive white paint.  

No comments:

Post a Comment