Saturday 27 August 2011

This is how I made the lower suspension skirt. The wooden formers were shaped and softened plastic was pushed over it to create the shape. 

A closup of the wooden formers and a section of  skirt, note that it is wavey which is desired as this is supposed to be a material.

I had to make inner and outer formers as the mating surfaces are different for all.

The full section can be seen here.

1 comment:

  1. Hi, I came across your site and wasn’t able to get an email address to contact you. Would you please consider adding a link to my website on your page. Please email me back and we'll talk about it.

    Thanks!

    Joel Houston
    JHouston791@gmail.com

    ReplyDelete